CRT bulb having a front panel with a higher CTE than its funnel

DETAILED DESCRIPTION What is claimed is: 1.
In a cathode ray tube bulb made by sealing a glass front panel to a funnel by cementing said panel and said funnel together with solder glass at predetermined elevated temperatures over a predetermined time and temperature sealing cycle, whereby a substantially rigid hermetic panel-to-funnel seal is formed and thereafter lowering the sealed bulb to room temperature; the improvement comprising: the front panel having an effective co-efficient of thermal expansion (CTE), over a temperature range from room temperature to the setting temperature of the sealant, which is greater than the effective CTE of the funnel over that temperature range, whereby residual stresses in the sealed bulb are distributed so as to produce a bulb with good evacuated pressure strength.
2.
The cathode ray tube bulb according to claim 1 wherein the glass panel is flat and skirtless.
3.
The CRT bulb according to claim 2 wherein the CTE of the panel glass is approximately 2.
times.
10.
sup.
-7 inch/inch/.
degree.
C.
or more higher than the CTE of the funnel.
4.
The CRT bulb of claim 1 wherein the funnel is glass.
5.
The CRT bulb of claim 1 wherein the solder glass is a devitrifying frit.
6.
The CRT bulb of claim 5 wherein the devitrifying frit has setting temperature of approximately 440.
degree.
C.
7.
The CRT bulb of claim 6 wherein the sealing cycle is as follows: 25.
degree.
C.
-375.
degree.
C.
at a rise rate of 6.
degree.
-11.
degree.
C.
per minute, 375.
degree.
C.
-440.
degree.
C.
at a rise rate of about 3.
degree.
-6.
degree.
C.
per minute, 44.
degree.
C.
held for about 35-45 minutes, cooling to 250.
degree.
C.
at 2.
5-7.
degree.
C.
per minute.
8.
In a cathode ray tube bulb made by sealing a glass front panel to a glass funnel by cementing said panel and said funnel together at predetermined elevated temperatures with devritrying solder glass whereby a rigid hermetic panel-to-funnel seal is formed and thereafter lowering the sealed bulb to room temperature; the improvement comprising: the front panel having an effective coefficient of thermal expansion (CTE), over a temperature range from room temperature to the setting temperature of the sealant, which is greater than the effective CTE of the funnel over that temperature range