Recorder actuator for communication lines

DETAILED DESCRIPTION What is claimed is: 1.
An adapter circuit to connect a tape recorder to the input line of a telephone to initiate recording responsive to the voltage drop in the input line, as from the higher "off" voltage to a lower "on" voltage when the telephone is lifted from its receiver and to cease recording responsive to the voltage rise in the input line, to the higher "off" voltage when the telephone is returned to its receiver, said tape recorder including a starting circuit and a recording circuit, and wherein the adapter circuit comprises: (a) a relay means having a coil whose leads shunt the leads of the telephone input line and a normally closed switch in the recorder starting circuit which opens whenever the coil is energized by a limiting current therethrough; (b) a resistance means in series with the coil to limit the current through the coil to a value sufficient to hold said normally closed switch open when said "off" voltage is at the input line but to a lower value insufficient to open said switch when the reduced "on" voltage is at said input line; whereby (c) said relay switch in the tape recorder starting circuit and is adapted to turn the tape recorder on and off as it closes and opens; (d) means to connect said recording circuit with the telephone input line to receive voltage fluctuations in the input line; and (e) a capacitance means shunting said resistance means, at one side of the coil, to provide a transient current drop and increase responsive to, respectively, a voltage decrease and increase in the input line when the telephone is lifted off from and returned to its receiver, whereby to provide a positive current drop and increase in the coil to assure action of the switch.
2.
The adapter circuit defined in claim 1, including further: a current limit means in said tape recorder circuit to prevent a current surge when the relay switch closes.
3.
The adapter circuit defined in claim 2, wherein the current limiting means is a resistor.
4.
The adapter circuit defined in claim 1, wherein said relay switch is polarized type, and including a rectifier bridge circuit means in the coil leads to apply a properly directed current to the relay switch regardless of the polarity of the connection of the coil leads with the leads of the telephone input line